TX Knives

Functional handmade kitchen knives

180mm Stainless Damascus Chef

836.00
sold out
DSCF7328.jpg
DSCF7327.jpg
DSCF7336.jpg
DSCF7340.jpg
DSCF7329.jpg
DSCF7330.jpg
DSCF7333.jpg
DSCF7342.jpg
DSCF7337.jpg

180mm Stainless Damascus Chef

836.00
sold out

(prisen er for begge knive)
#194

European style chef knife in Damasteel Rose. This is a very light knife and a great all round knife. It is an allround knife that can be used for most tasks in the kitchen or as a chefs line knife.

Weight: 156g

Length overall: 293mm

Balance point: At the front of the bolster

Blade

The blade has a flat grind with a wide bevel and is tapered from the bolster to the tip. The flat bevel has been polished after etching and appears more blank than the upper part of the blade.

The spine has been rounded to make the knife comfortable to use with a pinch grip. 

Steel: Damasteel Vinland

This steel is made by a small company in Sweden called Damasteel (www.damasteel.se). It is composed of two different powder metallurgy steels in alternating layers. It has a good corrosion resistance and superior edge sharpness and toughness. It is an excellent steel for knives and beautiful too.

After grinding and finishing the blade it is etched in muriatic acid. The acid only affects one of the steel types and eats away a bit of material form that and also colors it dark grey. Depending on how much the blade is etched, you can feel the small amount of material that has been removed when running your fingers over the blade.


The blade has been heat treated inhouse in a PID controlled furnace at 1100°C and quenched between aluminium plates. This is followed by deep freezing in dry ice and  a tempering cycle in a PID controlled oven to adjust the hardness..

Hardness: 62-63 HRC 

Height at heel: 46mm

Cutting edge length: 178mm

Thickness at

  • Spine at bolster: 2.4mm

  • Spine halfway: 1.8mm

  • 1 cm from the tip: 0.5mm

Handle

Material: Layered birch bark that has been treated with Danish Oil. Birch bark has been used for centuries in Scandinavia for knife handles, specially for the Finnish puukko knives.

Bolster: The bolster and butt is made of 303 stainless steel.

The knife is all handmade in my workshop in Copenhagen. I make two to three knives a week, each one is custom fitted. While they follow the same recipe they are all slightly different.

Add To Cart

(prisen er for begge knive)
#194

European style chef knife in Damasteel Rose. This is a very light knife and a great all round knife. It is an allround knife that can be used for most tasks in the kitchen or as a chefs line knife.

Weight: 156g

Length overall: 293mm

Balance point: At the front of the bolster

Blade

The blade has a flat grind with a wide bevel and is tapered from the bolster to the tip. The flat bevel has been polished after etching and appears more blank than the upper part of the blade.

The spine has been rounded to make the knife comfortable to use with a pinch grip. 

Steel: Damasteel Vinland

This steel is made by a small company in Sweden called Damasteel (www.damasteel.se). It is composed of two different powder metallurgy steels in alternating layers. It has a good corrosion resistance and superior edge sharpness and toughness. It is an excellent steel for knives and beautiful too.

After grinding and finishing the blade it is etched in muriatic acid. The acid only affects one of the steel types and eats away a bit of material form that and also colors it dark grey. Depending on how much the blade is etched, you can feel the small amount of material that has been removed when running your fingers over the blade.


The blade has been heat treated inhouse in a PID controlled furnace at 1100°C and quenched between aluminium plates. This is followed by deep freezing in dry ice and  a tempering cycle in a PID controlled oven to adjust the hardness..

Hardness: 62-63 HRC 

Height at heel: 46mm

Cutting edge length: 178mm

Thickness at

  • Spine at bolster: 2.4mm

  • Spine halfway: 1.8mm

  • 1 cm from the tip: 0.5mm

Handle

Material: Layered birch bark that has been treated with Danish Oil. Birch bark has been used for centuries in Scandinavia for knife handles, specially for the Finnish puukko knives.

Bolster: The bolster and butt is made of 303 stainless steel.

The knife is all handmade in my workshop in Copenhagen. I make two to three knives a week, each one is custom fitted. While they follow the same recipe they are all slightly different.