TX Knives

Functional handmade kitchen knives

270mm Stainless Damascus Sujihiki

750.00
DSCF6524.jpg
DSCF6527.jpg
DSCF6522.jpg
DSCF6526.jpg
DSCF6531.jpg
DSCF6528.jpg

270mm Stainless Damascus Sujihiki

750.00

#186

Slicing knife inspired by the Japanese Sujihiki knife.

This is a perfect slicing knife, sharp with a thin edge.

Weight: 183g

Length overall: 396mm

Balance point: Under the T of the logo.

Blade

The blade has a convex grind and is tapered from the bolster to the tip.

The spine has been rounded to make the knife comfortable to use with a pinch grip.

Steel: Damasteel Bifrost

This steel is made from two different powder steels by a small company in Sweden called Damasteel. The steel becomes stainless after heat treatment. It combines corrosion resistance with superior edge sharpness and toughness. It is an excellent steel for knives.

After grinding and finishing the blade it is etched in muriatic acid. The acid only affects one of the steel types and eats away a bit of material form that and also colors it dark grey. Depending on how much the blade is etched, you can feel the small amount of material that has been removed when running your fingers over the blade.


Heat treatment: The blade has been heat treated inhouse in a PID controlled furnace at 1100°C and quenched between aluminium plates. This is followed by a tempering cycle in a PID controlled oven to adjust the hardness..

Hardness: 62-63 HRC

Height at heel: 42mm

Cutting edge length: 270mm

Thickness at

  • Spine at bolster: 2.4mm

  • Spine halfway: 1.8mm

  • 1 cm from the tip: 0.7mm

Handle

Material: Stabilized and dyed maple.

Bolster and spacers: Stainless 303 bolster pinned to the blade with 303 pins, G10 and stainless spacers.


Treatment: The handle is treated with Danish Oil


Add To Cart

#186

Slicing knife inspired by the Japanese Sujihiki knife.

This is a perfect slicing knife, sharp with a thin edge.

Weight: 183g

Length overall: 396mm

Balance point: Under the T of the logo.

Blade

The blade has a convex grind and is tapered from the bolster to the tip.

The spine has been rounded to make the knife comfortable to use with a pinch grip.

Steel: Damasteel Bifrost

This steel is made from two different powder steels by a small company in Sweden called Damasteel. The steel becomes stainless after heat treatment. It combines corrosion resistance with superior edge sharpness and toughness. It is an excellent steel for knives.

After grinding and finishing the blade it is etched in muriatic acid. The acid only affects one of the steel types and eats away a bit of material form that and also colors it dark grey. Depending on how much the blade is etched, you can feel the small amount of material that has been removed when running your fingers over the blade.


Heat treatment: The blade has been heat treated inhouse in a PID controlled furnace at 1100°C and quenched between aluminium plates. This is followed by a tempering cycle in a PID controlled oven to adjust the hardness..

Hardness: 62-63 HRC

Height at heel: 42mm

Cutting edge length: 270mm

Thickness at

  • Spine at bolster: 2.4mm

  • Spine halfway: 1.8mm

  • 1 cm from the tip: 0.7mm

Handle

Material: Stabilized and dyed maple.

Bolster and spacers: Stainless 303 bolster pinned to the blade with 303 pins, G10 and stainless spacers.


Treatment: The handle is treated with Danish Oil