TX Knives

Functional handmade kitchen knives

  • Sold
  • 210mm stainless chef knife

210mm stainless chef knife

250.00
sold out
DSCF3533.jpg
DSCF3541.jpg
DSCF3510.jpg

210mm stainless chef knife

250.00
sold out

#35

European style chef knife. If you only had one knife this is my best suggestion for what it should be. It is quite sturdy, has a stainless blade and a good size for most people.

 

Weight: 211g

Balance point: Under the DENMARK of the logo, 14mm in front of the bolster.

Blade

The blade has a convex grind and is moderately tapered from the bolster to the tip.
The spine and choil has been rounded to make the knife comfortable to use with a pinch grip.

Steel: RWL-34
This is a powder metallurgy steel made specially for knives by Damasteel in Sweden. It has very high strength and toughness combined with extreme edge sharpness that is easy to maintain.
It has a reasonably good corrosion resistance, meaning it is stainless for most normal applications.

Heat treatment: The blade has been heat treated inhouse in a PID controlled furnace at 1050°C and quenched between aluminium plates. This is followed by a sub zero quench at -79°C and finally tempered in a PID controlled oven to the final hardness.

Hardness: 62 HRC

Height at heel: 49mm

Thickness at

  • Spine at bolster: 2.5mm

  • Spine halfway: 2.3mm

  • 1 cm from the tip: 0.8mm

 

Handle

Material: Australian Sydney Blue Gum

Bolster and spacers: Stainless 303 bolster pinned to the blade with 303 pins, vulkan fiber and stainless spacers.

Treatment: The handle is treated with Danish Oil

Add To Cart

#35

European style chef knife. If you only had one knife this is my best suggestion for what it should be. It is quite sturdy, has a stainless blade and a good size for most people.

 

Weight: 211g

Balance point: Under the DENMARK of the logo, 14mm in front of the bolster.

Blade

The blade has a convex grind and is moderately tapered from the bolster to the tip.
The spine and choil has been rounded to make the knife comfortable to use with a pinch grip.

Steel: RWL-34
This is a powder metallurgy steel made specially for knives by Damasteel in Sweden. It has very high strength and toughness combined with extreme edge sharpness that is easy to maintain.
It has a reasonably good corrosion resistance, meaning it is stainless for most normal applications.

Heat treatment: The blade has been heat treated inhouse in a PID controlled furnace at 1050°C and quenched between aluminium plates. This is followed by a sub zero quench at -79°C and finally tempered in a PID controlled oven to the final hardness.

Hardness: 62 HRC

Height at heel: 49mm

Thickness at

  • Spine at bolster: 2.5mm

  • Spine halfway: 2.3mm

  • 1 cm from the tip: 0.8mm

 

Handle

Material: Australian Sydney Blue Gum

Bolster and spacers: Stainless 303 bolster pinned to the blade with 303 pins, vulkan fiber and stainless spacers.

Treatment: The handle is treated with Danish Oil