TX Knives

Functional handmade kitchen knives

  • Sold
  • 210mm stainless chef knife

210mm stainless chef knife

250.00
sold out
DSCF3507.jpg
DSCF3534.jpg
DSCF3536.jpg
DSCF3537.jpg
DSCF3536.jpg
DSCF3538.jpg
DSCF3538.jpg

210mm stainless chef knife

250.00
sold out

#37

European style chef knife. If you only had one knife this is my best suggestion for what it should be. It is quite sturdy, has a stainless blade and a good size for most people.

Please note that the wood for the handle has a cavity that has been filled with black epoxy. It has no structural impact. Please check the images.  

 

Weight: 197g

Balance point: Between the X of the logo, 14mm in front of the bolster.

Blade

The blade has a convex grind and is moderately tapered from the bolster to the tip.
The spine and choil has been rounded to make the knife comfortable to use with a pinch grip.

Steel: RWL-34
This is a powder metallurgy steel made specially for knives by Damasteel in Sweden. It has very high strength and toughness combined with extreme edge sharpness that is easy to maintain.
It has a reasonably good corrosion resistance, meaning it is stainless for most normal applications.

 

Heat treatment: The blade has been heat treated inhouse in a PID controlled furnace at 1050°C and quenched between aluminium plates. This is followed by a sub zero quench at -79°C and finally tempered in a PID controlled oven to the final hardness.

 

Hardness: 62 HRC

Height at heel: 49mm

Thickness at

  • Spine at bolster: 2.5mm

  • Spine halfway: 2.1mm

  • 1 cm from the tip: 0.9mm

 

Handle

Material: Australian Sheoak lace

Bolster and spacers: Stainless 303 bolster pinned to the blade with 303 pins, vulkan fiber and stainless spacers.

Treatment: The handle is treated with Danish Oil



 

Add To Cart

#37

European style chef knife. If you only had one knife this is my best suggestion for what it should be. It is quite sturdy, has a stainless blade and a good size for most people.

Please note that the wood for the handle has a cavity that has been filled with black epoxy. It has no structural impact. Please check the images.  

 

Weight: 197g

Balance point: Between the X of the logo, 14mm in front of the bolster.

Blade

The blade has a convex grind and is moderately tapered from the bolster to the tip.
The spine and choil has been rounded to make the knife comfortable to use with a pinch grip.

Steel: RWL-34
This is a powder metallurgy steel made specially for knives by Damasteel in Sweden. It has very high strength and toughness combined with extreme edge sharpness that is easy to maintain.
It has a reasonably good corrosion resistance, meaning it is stainless for most normal applications.

 

Heat treatment: The blade has been heat treated inhouse in a PID controlled furnace at 1050°C and quenched between aluminium plates. This is followed by a sub zero quench at -79°C and finally tempered in a PID controlled oven to the final hardness.

 

Hardness: 62 HRC

Height at heel: 49mm

Thickness at

  • Spine at bolster: 2.5mm

  • Spine halfway: 2.1mm

  • 1 cm from the tip: 0.9mm

 

Handle

Material: Australian Sheoak lace

Bolster and spacers: Stainless 303 bolster pinned to the blade with 303 pins, vulkan fiber and stainless spacers.

Treatment: The handle is treated with Danish Oil